Always in motion
The berbel Moveline table lift hood rests practically invisibly in the worktop. During cooking, it rises up from its recess and bends over your pots and pans at the optimum distance. Powerfully, this hob extractor sucks in odours and cooking vapours. Cooking with gumption. Enjoy it with all your senses! Inside the lift-enabled extractor hood, the berbel principle ensures clean air. Another smart feature: The high-quality LEDs in the head of the Moveline table lift hood. They skilfully light up the hob. For a great atmosphere and clear view in the kitchen.
A sophisticated mechanism allows the table lift hood to move almost magically out of the worktop. Thanks to its optimum position above the hob, practically all rising cooking vapours are captured. Due to its high capture efficiency, it works perfectly with an 875 m³/h fan from the new EC generation. This makes the Moveline into a uniquely quiet extractor hood.
RecirculationRecirculation mode is the most energy-saving operating mode. The air is cleaned by an odour filter and directed back into the room. The room temperature is not altered. It is also simple to implement, because wall penetrations and exhaust channels are not required. Due to their large volume, berbel charcoal filters® are especially efficient at odour-binding and absorb up to 97% of bad smells. A further advantage of the berbel recirculation filter: only the proactive carbon needs to be changed – not the entire filter – and it only needs to be replaced every two to three years depending on how hard the filter has to work. The berbel refill pack is available for a cost-effective and environmentally friendly replacement.
Exhaust airExhaust air directed outside the building is particularly effective when it comes to the removal of odours, fumes and the moisture that results from cooking. It is advisable to use a berbel automatic wall sleeve to minimise heat loss. This seals and insulates the pipe outlet on the façade when the extractor hood is switched off. The planning of the exhaust air flow path should be optimised, since this positively influences the efficiency and smooth running of the hood. The appropriate duct material for this can be found in the exhaust air accessories section.
HybridCombine the benefits of both exhaust air mode and recirculation mode. With the berbel EcoSwitch you can respond flexibly to your needs depending on cooking and weather conditions by using the EcoSwitch button on your berbel extractor hood to switch between energy-saving recirculation mode in winter and particularly effective exhaust air mode whenever you need: for instance during fast browning or throughout the summer months. In addition to the berbel extractor hood with EcoSwitch you need the following system components for this:
|Available widths in cm||100|
|Energy efficiency class||A|
|Annual consumption in kWh||44.2|
|Fluid dynamic efficiency class||A|
|Lighting efficiency class||A|
|Fat separation class||C|
|Acoustic pressure stage 3 (dB(A) re 20 µPA)||53|
|Sound level stage 3 (dB(A) re 1 pW)||63|
|Performance stages||3 + power stage (P)|
|Free-blowing fan performance, m3/h||875|
|Power consumption, W||170|
|Pipe connection, Ø in mm||150|
|Net weight, kg||70|
|Afterrun function for recirculation mode||✓ automatic (configurable)|
|Recirculation filter saturation indicator||✓|
|Rec. distance from hob||Fixed distance - not suitable for gas hobs|